Now I know this is not a Ducati, but its parked close to a relative of a Ducati, my DB2.

I just wanted to show you my inexpensive front stand I made from 1 inch black pipe, available from most hardware stores, i.e. Home Depot. It just screws together in about 5 minutes and when you are done, you just unscrew it for storage.

The total cost was about $48. My R1 has been hanging like this for about 2 weeks while I put Race Tech Gold Valves in the forks.

Shopping List:

Qty	Part Description	Where Used
4	8" x 1" pipe	Feet
4	24" x 1" pipe	Vertical Legs
4	1" Tee	2 for Top Bar, 2 for Legs to Feet
2	1" 90 degree Elbows	Vertical Legs to Top Bar
2	4" x 1" pipe	Connect Elbow to Tee on top bar
4	1" Caps	End of Feet
2	1" Connectors	Connect  two 24" pipes to make vertial legs
1	30" x 1" pipe	Top bar

Visits: 11,413